Non Isotopic Irradiators
Irradiators from Kubtec are used for seed imaging, insect sterilization and infestation. the systems are based on non-isotopic technology of high energy level X-rays.
XCELL Series
Mobile Non Isotope Irradiators
Non Isotopic irradiators offer a cost effective alternative to isotope based irradiation. Using high energy X-ray levels for irradiation also enables irradiation in accurate repeatable monitored doses, overall increasing operator safety and contributing to procedure unity.
The XCELL irradiator series from Kubtec offers non isotopic irradiators in various sizes in order to best fit your specific needs. the units are fully shielded and contain a high-frequency electrically generated x-ray source that requires no NRC licensing. A user friendly software allows easy control of dose, time formats, and other operating modes for easy operation of the units, even without prior X-ray training.
So Where is the Technological Twist?
XCELL irradiators are truly mobile units. the various sizes enable their deployment in a variety of locations and for a variety of applications, ranging from animal, food, cell, and seed irradiation to component irradiation for scientific and commercial environments. The high-frequency X-ray source enables precise and repeated irradiation procedures for maximal effectiveness and efficiency.
XCELL irradiators Series features include:
-
Automated warm-up and controlled tube conditioning
-
Specimen turntable is operated electrically
-
Compliant with international and U.S Federal and State radiation safety regulations
-
Optional digital video output
-
Optional entry port for small tubing and cables
-
Adjustable sample shelf
Tech Spec: XCELL 450, 320, 225, 160
-
Overall Dimensions: 121.9(w) X 101.6(d) X 182.9(h) cm (48″X40″X72″)
-
Irradiation Chamber: 76.2 (w) X 76.2 (d) X 101.6 (h) cm (30″X 30″X40″)
-
Weight: 1905 Kg (4200 lbs)
-
Power: 220 VAC +/- 10%, 30 Amps, 47/63 Hz single phase
-
Output Current: 0.1 – 45 mA
-
Output Power: Up to 4500 W
-
X-ray Tube Type: Metal Ceramic, Fixed Anode, Water Cooled
-
Focal Spot Sizes: IEC 3.0 mm (5.5 mm per EN12543)
-
Inherent Filtration: 4.0 mm Be maximum
-
Cooling: Integrated closed loop liquid heat exchanger
Tech Spec: XCELL 140
-
Energy Range: 20-160 kV
-
Tube Current: 0.1 to 5 mA (700 W unit)
-
Focal Spot Size, IEC: 2.5 mm; 2.5 mm (IEC60336)
-
Inherent Filtration, max.: 1.5 mm glass, 9-26 mm oil, 0.4 mm Aluminum
-
Maximum Coverage: Beam Coverage 40 degree cone angle
-
Exposure Time: Manual (continuous) or variable in 1 sec increments
-
Power: 220 VAC + 15%, 50/60 Hz; 5 Amps, single phase
-
Cooling: Integrated closed-loop heat exchanger
-
Specimen Turntable: Electronically operated, variable speed
-
External Dimensions: 76.2(w) X 76.2(d) X 121.9(h) cm (30″X30″X48″)
-
Internal Dimensions: 61(w)X61(d)X76.2(h) cm (24″X24″X30")
-
Weight: 300 Kg (650 lbs)
Tech Spec Variations:
XCELL 450:
-
Output Voltage: 10 – 450 kV
-
Maximum Potential: 450kV
XCELL 225:
-
Output Voltage: 10 – 225 kV
-
Maximum Potential: 225kV
XCELL 320:
-
Output Voltage: 10 – 320 kV
-
Maximum Potential: 320kV
XCELL 160:
-
Output Voltage: 10 – 160 kV
-
Maximum Potential: 160kV
Tech Spec: XCELL 50
-
Overall Dimensions: 28(w) X 30.5 (d) X 51(h) cm (11″X12″X20″)
-
Irradiation Chamber: 15.2(w) X 20.3(d) X 3.8(h) cm (6″X8″X1.5″)
-
Weight: 32 Kg (70 lbs)
-
Power: 110 VAC +/- 10%, 5 Amps
-
Output Voltage: 10 – 50 kV
-
Output Current: 0 – 1.0 mA
-
Maximum Potential: 50 kV
-
Output Power: 50 W
-
Inherent Filtration: 0.127 mm Be maximum
-
Cooling: Integrated air cooled heat exchanger
* Specifications are subject to change without notice.
Images Copyright © 2015 KUB Technologies, Inc. of which RTUTec is a distributor
More About Testing and Research
More About Clinical and Treatment